A sewer and water permit is required under the provincial Safety Codes Act when installing, altering or relocating sewer and water equipment such as:

• Sewer Lines
• Water Lines
• Storm or sanitary sewers
• Water Connections
• Weeping Tile

Weeping tile can be connected to your storm sewer system, provided that a connection is available. The system must run through a backwater valve that is accessible from the basement of your building.

Homeowners must own and occupy the property and be completing the work themselves to obtain a permit.

1. Homeowner must apply for permits in person (address listed below)
2. Complete the Single Family Homeowners Plumbing and Gas Application
3. Include a detailed drawing with piping layout including fitting descriptions and sizing
4. After the work has been completed you must schedule an inspection by calling 311.

A permit must be obtained prior to starting any work and booking an inspection.

Contractors must be bonded and licensed with the City of Edmonton.

1. Complete the Contractors Plumbing and Gas Application
2. fax to 780-496-6034 or come to our offices (address listed below)
3. After the work has been completed you must schedule an inspection by calling 311.

OR

Contractors who have an online account may apply for their permits and book their inspections online.

A permit must be obtained prior to starting any work and booking an inspection.

Inspection Information

• After the work is completed an inspection of the equipment is required.
• All equipment that will be concealed must be inspected and approved before it is covered.
• If the work has not had an inspection but has been covered, the inspector has the authority to request the area to be opened for inspection.

Booking an Inspection

In occupied homes

• The owner of the home should be phoning to book the inspection since they will be required to ensure that either themselves or another adult is there when the inspection occurs.
• Inspections can be booked by calling or faxing our office. Please indicate the type of inspection that is required as well as permit holders name and phone number and the address where the inspection needs to be done.

Extra Inspections

A fee of $240, effective January 1, 2013, shall be assessed for every inspection requested where any of the following items are found to be deficient:

• No address on site, building, or suite as applicable
• Inspector unable to access the building, having been called to inspect
• Project not ready for inspection, when inspector has been called to do an inspection
• Inspection called for where previously identified deficiency has not been corrected.

Sewer and water permit is $100 plus a Safety code fee of $4.50

For more information:

Current Planning Service Centre